|
Problem: All Channels are Fuzzy
|
Is it only happening on channels above Channel 13? |
|
Your TV and/or VCR has a setting for "Cable" or "Antenna".
Make sure it is set on "Cable" (through a switch or an on-screen menu on the
TV). |
|
With a VCR Connected |
|
1. |
Check the VCRs power cord to make sure its plugged into an electrical
outlet. |
|
2. |
The VCR may not be fine tuned. Locate and adjust the fine tuning
mechanism until the picture is clear. |
|
Without a VCR Connected |
|
You may have a loose
fitting inside your home. Be sure the fittings are securely
crimped to wires, and hand tighten each
fitting connected to each piece of equipment. |
If you are still experiencing problems,
contact our customer service department at
471-6599 or 1-800-635-8230
AVOID COSTLY SERVICE CALLS
CHECK OUT OUR
CABLEGUARD PLAN
| 
