|
Without a VCR Connected |
|
1. |
Check the televisions vertical or horizontal hold.
Adjust if needed. |
|
2. |
If you have a converter
box, make sure the TV is on Channel 3. |
|
3. |
Check the TVs fine tuning and
adjust if needed. |
|
4. |
Make sure the fittings are
securely crimped to wires and hand tighten each fitting connected to each piece of equipment. |
|
With a VCR Connected |
|
1. |
Check the televisions
vertical or horizontal hold.
Adjust if needed. |
|
2. |
If you have a converter box,
make sure the TV is on Channel 3. |
|
3. |
Check the TVs fine tuning and
adjust if needed. |
|
4. |
Be sure the VCR is plugged
into the power outlet. If a converter is connected, the VCR needs to be on
Channel 3. |
|
5. |
Check the VCRs fine tuning
and adjust if needed. |
|
6. |
Make sure the ch 3/ch 4 switch in on ch 3. |
|
7. |
Make sure the fittings are
securely crimped to wires, and hand tighten each fitting connected to each piece of equipment. |
