|
With a VCR
or DIGITAL RECEIVER Connected |
| 1. |
Make sure the VCR is plugged into a power
outlet. Turn off the VCR. If the problem clears up, the VCR is not properly fine tuned. |
| 2. |
If a convertor or Digital Receiver is connected, the VCR needs to be on channel 3. |
| 3. |
Make sure the ch 3/ch 4 switch on the VCR
and/or Digital Receiver is set to channel 3.
|
|
Without a VCR
or DIGITAL RECEIVER Connected |
| 1. |
If you have a converter: |
|
A. |
Make sure the TV is on channel 3. |
|
B. |
Check that all fittings are
securely crimped to wires and hand tighten each fitting
connected to each piece of equipment. |
| 2. |
If you do not have a converter connected, make sure all the fittings are
securely crimped to the wired, and hand
tighten each fitting connected to each piece of equipment. |
